1x2 PM Switch (Best)

features	applications
high extinction ratio low insertion loss high channel isolation highly stable and reliable epoxy-free optical path	optical signal routing network test systems instrumentation

fiberw pms series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. this is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. at the same time, the polarization state of the signal is preserved.

performance specifications

parameter	specification
operating wavelength (nm)	1310, 1550
insertion loss (db)	<0.8
wavelength dependent loss (db)	<0.15
extinction ratio (db)	>18 (typ.20)
channel cross talk (db)	>55
repeatability (db)	��0.02
return loss (db)	>50
switching speed (ms)	<10 (typ.4)
drive voltage (v)	5
power handling (mw)	500
durability (cycles)	10 million
operating temperature (��c)	0 ~ +70
storage temperature(��c)	-40 ~ +85
fiber type	panda pm fiber
dimensions (lxwxh) (mm)	22.3x12x10

electrical pin configuration:

optical path		port1 - port2		port1 - port3
electric drive	latching	pin1	pin10	pin1	pin10
		v+	gnd	gnd	v+
sensor status	latching	pin2-3, pin8-9 open		pin2-3, pin8-9 close
		pin3-4, pin7-8 close		pin3-4, pin7-8 open

specifications may change without notice

dimensions (mm)

ordering information

pms

option

operating wavelength

port

grade

pigtail style

fiber length

in/out connector

l= latching

15=1550nm

13=1310nm

0102=1x2

p=p grade

1= bare fiber

2=900um jacket

1=1m

2=2m

0=none
1=fc/apc
2=fc/pc
3=sc/apc
4=sc/pc
5=st
6=lc