1x2 2x2 PM Mechanical Optical Switch (Best)

features			applications
unmatched low cost low insertion loss high channel isolation highly stable and reliable epoxy-free optical path latching or non-latching			optical signal routing network test systems instrumentation

fiberw pms series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. this is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. at the same time, the polarization state of the signal is preserved.

performance specifications

parameter	specification
operating wavelength (nm)	1310��40	1550��40
insertion loss (db)	0.8(typ.), 1.2(max.)
wavelength dependent loss (wdl) (db)	<0.20
extinction ratio (db)	> 18 (typ 20)
repeatibility(db)	��0.02
channel cross talk (db)	>60
return loss (db)	>55
switching speed (ms)	<10
operating voltage (v)	4.5 ~ 5.5
power handling (mw)	500
durability (cycles)	10 million (min.)
operating temperature (��c)	0 ~ +70
fiber type	panda pm fiber
dimensions (lxwxh) (mm)	29x15x10

electrical pin configuration:

optical path		port1~ port3 and port2 ~ port4		port1~ port4 and port ~ port3
electric drive	non-latching			pin1	pin10
	latching	pin10	pin6	pin1	pin5
		v+	gnd	v+	gnd
sensor status	non latching and latching	pin2-3, pin8-9 close		pin2-3, pin8-9 open
		pin3-4, pin7-8 open		pin3-4, pin7-8 close

specifications may change without notice

dimensions

ordering information

pms

option

operating wavelength

port

grade

pigtail style

fiber length

in/out connector

l= latching

n=non- latching

15=1510~1610nm
13=1260~1360nm

0202=2x2

p=p grade

1=bare fiber
2 =900um jacket

1=1m
2=2m

0=none
1=fc/apc
2=fc/pc
3=sc/apc
4=sc/pc
5=st
6=lc

1x2 2x2 PM Optical Switch

performance specifications

electrical pin configuration:

dimensions

ordering information

pms

1x2 2x2 PM Mechanical Optical Switch